Black red yellow blue skull design stainless steel tattoo foot pedal switch footswitch power supply - купить  
banner_728х90 Blackfriday 728x90 topradar_600x90
Каталог самых низких цен на товары (на главную страницу)  

black red yellow blue skull design stainless steel tattoo foot pedal switch footswitch power supply купить по лучшей цене

Brand Jtron Model 03100412 Quantity 1 Color Black Material Plastic Specification Operating voltage: DC 4.5~30V; Measure voltage: DC 0~100V; Minimum resolution(V): 0.1V; Measure current: 100A (Shunt resistor needed (100A/75mV)); Minimum resolution(A): 0.01A; Operating current: <20mA; Display: 0.28" LED 3-digital tube; Display color: Red and Blue (two-color display); Dimensions: 48 x 29 x 21mm; Mounting cutout: 45.5 x 26.5mm; Refresh rate: about 500mS / times; Measure accuracy: 1% (+/- 1 digit); Operating temperature: -10C~65C; Operating Humidity: 10%~80% (non-condensing); Working pressure: 80~106 kPa Features Wiring: Black line (thin): vacant or buck circuit (module) negative; Red line (thin): power supply+; Black line (thick): COM common measuring; Red line (thick): PW+ measuring terminal voltage input positive; Yellow line (thick): IN+ current input+; (Please refer to the wiring diagrams for more details); Notice: The voltage between the thin red and thin black lines must be within DC 4.5~30V; The ammeter can only be connected to the negative of the device under test; 10A below ammeter (include 10A) built-in shunt does not require external shunt; When the black thin line vacant it is better to use insulating tape around the exposed part of the wire to prevent short circuits; If just be used as a voltmeter it is recommended that the yellow line and the black line were connected together to prevent the ammeter digital flashing Application DIY projects; Suitable for automotive / electric cars / motorcycles battery monitoring or other products voltage current measurement English Manual/Spec Yes Other Dual LED: Red voltage Blue current Display Voltage Current at same time; This panel meter is common ground design it means that the (measure ground wire) and (power supply ground) is common ground. Power Supply DC 4.5~30V. With reverse polarity protection but the max power supply can not exceed DC 30V. Wire Connection please check the description pictures. Power supply (two line socket): Red wire: Power Supply +; Black wire: Power Supply -; The power supply voltage can not exceed 30V; Measure Port (three line socket); COM: Black wire measure common ground; PW+: Red wire Measure Voltage + IN+ Yellow wire Measure current input. if use the voltmeter function only please connect the Yellow wire and black wire together to avoid the Interference Packing List 1 x Digital volt ampere meter (12cm-cable)
Страницы: 1 2 3 4 5 6 7 8 9 10

Лучший случайный продукт: